トップページ › 無線通信営業部ホーム › ニュースリリース一覧 › 新製品情報　Prewell CorporationMeduim Power - PH330

無線通信営業部

ニュースリリース

プレスリリース：2008年9月10日

新製品情報　Prewell Corporation
Meduim Power - PH330

Meduim Power - PH330.pdf

Prewell Corporation　-　High Linearity InGaP HBT Amplifier Meduim Power - PH330
Features
  • 500MHz - 3000MHz
  • 19.0 dB Gain at 900MHz
  • +22.5 dBm P1dB
  • +41 dBm Output IP3
  • Single Voltage Supply
  • Lead-free / Green / RoHS compliant SOT-89 Package

Applications
  • Mobile Infrastructure
  • PCS, WCDMA, WiBro
  • W-LAN / ISM
  • RFID / Fixed Wireless

Functional Diagram
Functional Diagram


Description

The PH330 is a high performance InGaP HBT MMIC Amplifier and high linearity driver amplifier in a high quality SOT-89 package. The device features excellent Input and output return loss, highly linear performance. The device can be easily matched to obtain optimum power and linearity. The product is targeted for use as driver amplifier for wireless infrastructure applications. The PH330 operates from a single +5 voltage supply and have an internal active bias. All devices are 100% RF and DC tested


Specifications
Specifications

Test Conditions : T=25°C, Supply Voltage=+5V, 50ohm System, OIP3 measured with two tones at an output power of +7dBm/tone separated by 1MHz.


500 MHz Application Circuit
images
Gain vs. Frequency Input Return Loss Output Return Loss
Gain vs. Frequency Input Return Loss Output Return Loss
Noise Figure vs. Frequency P1dB vs. Frequency
Noise Figure vs. Frequency P1dB vs. Frequency
Output IP3 vs. Frequency
+6dBm/tone, +25oC		 OIP3 vs. Temperature
Freq=500MHz, +6dBm/tone
Output IP3 vs. Frequency OIP3 vs. Temperature


900 MHz Application Circuit
900 MHz Application Circuit

Gain vs. Frequency Input Return Loss Output Return Loss
Gain vs. Frequency Input Return Loss Output Return Loss
P1dB vs. Frequency Output IP3 vs. Frequency
+6dBm/tone, +25oC		 OIP3 vs. Temperature
Freq=900MHz, +6dBm/tone
P1dB vs. Frequency Output IP3 vs. Frequency OIP3 vs. Temperature
Noise Figure vs. Frequency ACPR IS-95A vs. Channel Power
IS-95, 9 Ch. Forward, 30 kHz Meas BW, 885 kHz offset		  
Noise Figure vs. Frequency ACPR IS-95A vs. Channel Power images

1900 MHz Application Circuit
1900 MHz Application Circuit
Gain vs. Frequency Input Return Loss Output Return Loss
Gain vs. Frequency Input Return Loss Output Return Loss
P1dB vs. Frequency Output IP3 vs. Frequency
+7dBm/tone, +25oC		 OIP3 vs. Temperature
Freq=1900MHz, +7dBm/tone
P1dB vs. Frequency Output IP3 vs. Frequency OIP3 vs. Temperature
Noise Figure vs. Frequency ACPR IS-95A vs. Channel Power
IS-95, 9 Ch. Forward, 30 kHz Meas BW, 885 kHz offset		  
Noise Figure vs. Frequency ACPR IS-95A vs. Channel Power images
2140 MHz Application Circuit
2140 MHz Application Circuit
Gain vs. Frequency Input Return Loss Output Return Loss
Gain vs. Frequency Input Return Loss Output Return Loss
P1dB vs. Frequency Output IP3 vs. Frequency
+7dBm/tone, +25oC		 OIP3 vs. Temperature
Freq=2140MHz, +7dBm/tone
P1dB vs. Frequency Output IP3 vs. Frequency OIP3 vs. Temperature
Noise Figure vs. Frequency W-CDMA ACLR vs. Channel Power
3GPP W-CDMA, Test Model1 + 64DPCH, 5MHz offset		  
Noise Figure vs. Frequency W-CDMA ACLR vs. Channel Power images
2300 MHz Application Circuit
2300 MHz Application Circuit

Gain vs. Frequency Input Return Loss Output Return Loss
Gain vs. Frequency Input Return Loss Output Return Loss
Noise Figure vs. Frequency   P1dB vs. Frequency
Noise Figure vs. Frequency   P1dB vs. Frequency
Output IP3 vs. Frequency
+7dBm/tone, +25oC		   OIP3 vs. Temperature
Freq=2300MHz, +7dBm/tone
Output IP3 vs. Frequency   OIP3 vs. Temperature
Absolute Maximum Ratings
Absolute Maximum Ratings
Operation of this device above any of these parameters may cause permanent damage.
Lead-free /RoHS Compliant / Green SOT-89 Package Outline
Lead-free /RoHS Compliant / Green SOT-89 Package Outline

images
ESD / MSL Ratings
  • 1. ESD sensitive device. Observe Handling Precautions.
  • 2. ESD Rating : Class 1C(Passes at 1000V min.) Human Body Model (HBM), JESD22-A114
  • 3. ESD Rating : Class IV (Passes at 1000V min.) Charged Device Model (CDM), JESD22-C101
  • 4. MSL (Moisture Sensitive Level) Rating : Level 3 at +260°C Convection reflow, J-STD-020


Evaluation Board Layout (4x4)
images


Mounting Instructions
  • 1. Use a large ground pad area with many plated through-holes as shown.
  • 2. We recommend 1 oz copper minimum.
  • 3. Measurement for our data sheet was made on 0.8mm thick FR-4 Board.
  • 4. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.
  • 5. RF trace width depends on the board material and construction.
  • 6. Add mounting screws near the part to fasten the board to a heatsink.


プリウェル社詳細は http://www.netwell.co.jp/wireless/maker/prewell.html

お問い合わせ

株式会社ネットウエル　無線通信営業部
電話：03-5368-3453
オンラインでのお問い合わせはお問い合わせフォームから

上へ戻る